Products
PRODUCT QUICKLIST

   
Our Products » Honeywell » Maxon Combustion System »
Slate

Slate Capability Overview
Brochure
1. Base
  • 24-230v AC/DC with same OS number
  • Modbus TCP/IP, BACnet IP/MSTP, Webservices
  • Scalable and flexible, make it your own
  • Event history
  • Fault information
  • Kit and curve storage

2. Burner Control
  • Breadth of 7800 line
  • Dual fuels
  • Valve proving
  • Clear fault indications
  • 7800 Emulation Tool
  • Multiple burner controls in one system
  • SIL3 capable

3. Fuel Air Ratio
  • 4 actuator channels allowing control on single fuel curve with multiple modulating fuel valves
  • 2 VFD channels
  • Seasonality curves
  • Trim
  • Capable of controlling 6 actuators/VFD/motors per fuel
  • Span of torque sizes allowing for larger range of applications from commercial to heavy industrial

4. Limit
  • UL353 rated
  • Dedicated safety module that reduces wiring complexity
  • 24 VDC to 24 to 240 VAC
  • SIL3 capable

5. I/O
  • Universal Analog and Digital I/O
  • Multiple I/O count
  • Optimized solution set
  • 24 VDC to 24 to 240 VAC (Digital Module)
  • 2 wire (show diagram)
  • Powered sensor (show diagram)

6. Annunciator
  • Open format annunciator that is not pre-configured like 7800
  • Multiple annunciation capability

7. Flame Amps
  • Continuous cycling
  • Compatible with all Honeywell Flame Detectors
  • SIL 3 capable
  • IR, UV, UV/Visible, rectification
  • 24 VDC Flame Amp UV/Visible or IR Amplicheck
  • IFM pending

8. Sub-base
  • Back plane communications
  • DIN Rail mounted
  • Connector for remote flame amp and reset

9. Display
  • 24 VAC and VDC
  • Open design
  • Tool to create graphics
  • Use your own display
  • Web based
  • 10 inch releasing in June 2017

10. Low Torque
  • NEMA 1 and NEMA 4 version
  • 0.1 degree accuracy
  • No plastic parts
  • Closed loop Modbus RS-485

9. 300 and 900 in/lb
  • NEMA 4 and 4X versions
  • Non-incendive for C1-D2 Hazardous Location Certification and Non C1-D2 General Use
  • 0.1 degree accuracy
  • Shaft bearing enables up to 750# of side load to minimize linage hysteresis
 
Copyright © 2009-2024 Nationwide Oil & Gas Sdn Bhd (573654-D). All Rights Reserved